Oce CS665 Pro Copy Operations Download

Page: 301 / 493

CS665 Pro

10-37

Color adjustment

10.11

Selecting glossy

Use this function to increase shine on the copy image.

To specify glossy

Position the original.

Touch [Quality Adjust.] on the Copy Screen.

The Quality Adjustment Screen will be displayed.

Touch [Glossy] to highlight it.

Touch [Close] on the Quality Adjustment Screen.

The Copy Screen will be restored with the [Glossy] key displayed and highlighted under the [Quality
Adjust.] key.

Do you want to restore the initial setting?

Touch [Default Set].

Detail

Setting Glossy will lower the copy speed. For details, see the User’s guide – POD Administrator’s
reference.

Summary of Contents for CS665 Pro














































































































































































































































































































































































































































































































Search results

Summary of Contents for CS665 Pro

Reviews:

Related manuals for CS665 Pro

Brands by name

Popular brands

Oce CS665 Pro, Copy Operations

Search results

Summary of Contents for CS665 Pro

Reviews:

Related manuals for CS665 Pro

Brands by name

Popular brands