Oce CS665 Pro, Copy Operations

Page: 86 / 493

2 Preparation for use
2-32 CS665 Pro
To use the machine temporarily
The following procedure temporarily enables the machine operation. (Timer Interrupt)
0 The Timer Interrupt password is to be specified in the administrator setting. Ask your administrator for
the password.
0 You cannot specify the copy time shorter than 5 minutes; entering 0 for hour and a number smaller than
5 for minute will set the minute at 5.
Also, a number larger than 60 is unavailable for minute.
1
Press [Power Save] on the control panel.
The Machine Status Screen will be displayed along with the
message shown below.
Timer interrupt mode
Enter password $###
The machine power will be turned off automatically after 5
minutes from this state if a password is not entered.
Or, if the following message is displayed, proceed to step 3.
Input desired copy time
$ hour(s) $# minute(s)
2
Enter the Timer Interrupt password, then press [Start].
– Enter a 4-digit Timer Interrupt password using the control panel keypad, then press [Start].
?
Do you want to correct an invalid password?
% Continue by entering the valid 4-digit password.
3
Set the hour for the interrupt use, then press [Start].
– Enter a 1-digit hour (ex. 3 for 3 hours) using the control panel keypad (0 ~ 9), then press [Start].
Input desired copy time
3 hour(s) $# minute(s)
4
Set the minute for the interrupt use, then press [Start].
– Enter a 2-digit minute (ex. 07 for 7 minutes) using the control panel keypad (00 ~ 59), then press
[Start].
Input desired copy time
3 hour(s) 07 minute(s)
Copying is available until the set time is up.
5
When the machine operation is finished, press [Power Save] for one second or longer, then release it.
The machine returns to OFF condition.