Oce CS665 Pro, Copy Operations

Page: 24 / 493

1 Introduction/Safety information
1-18 CS665 Pro
Image repeat
Selects the horizontal image area across the page, and repeats it down the page as many times as the repeat
width setting (10 ~ 150 mm) permits in manual or auto.
Insert image
Stores pages in memory from the original glass, and inserts the pages into a document copied from the
document feeder.
Insert sheet
Insert up to 26 blank or copied sheets from any tray, or inserts blank or copied front and back covers from
any tray to enhance the presentation of multi-page documents.
Interrupt copying
Interrupts copying-in-progress to perform an urgent copy, using any of the copier features for the interrupt
job.
Job list
Displays the Job List Screen to view the current machine status, changes the operation order of reserve jobs,
deletes the unused reserve job, or displays the previous job list.
Manual shut-off
Shuts off the machine power when pressing [Power Save] on the control panel.
Mixed in original setting
Copies mixed size originals from the document feeder in Auto Paper Select or Auto Zoom mode. Auto Paper
Select automatically selects the paper size of each original. Auto Zoom mode allows you to select one paper
size for all originals.
Mode memory
Programs up to 30 jobs and recalls each job by job number, as needed. All compatible original glass functions
can be programmed into Mode Memory directly after they are selected.
Multi-page enlargement
Makes an enlarged copy of an original by dividing to several page.
Neg./pos. reverse
Reverses the image from black-on-white to white-on-black or vice versa.
Non-image area erase
When copying from the original glass when the document cover is open, copies only the image area and not
the exposed area of glass, which would otherwise copy as black.
Output for finisher FS-520/FS-607 with Paper inserter PI-502
Cover sheet feeding
Off Line Finisher mode
Output for machine with Finisher FS-521 installed
Non-Sort, Collate, Uncollate, and Staple modes using the primary (main) tray
Collated and Uncollate modes using the secondary (sub) tray
Selects an output tray and output mode on the Output Application Screen.
Output for machine with Finisher FS-520 installed
Non-Sort, Collate, Uncollate, and Staple modes using the primary (main) tray
Collate and Uncollate modes using the secondary (sub) tray
Selects an output mode and output tray on the Output Application Screen.