Oce CS665 Pro, Copy Operations

Page: 324 / 493

11 Application functions
11-20 CS665 Pro
1
Load the original in the ADF.
– Be sure to arrange the original in page order, and then place it with the first page faceup. Up to 100
original sheets can be set.
If the original count exceeds 100, divide them into blocks not exceeding 100 sheets, and load them
from the block with the first page.
2
Touch [Application] on the Copy Screen.
3
Touch [Insert Image] on the Application Screen.
4
Specify the image insertion location by entering page number.
– Use the control panel keypad to enter the page number. Touch [Set] after each entry to move to the
next key.
To clear an incorrect entry, touch [Delete].
Repeat this procedure to make all the page entry.
– Up to 30 image insertion locations can be specified. To enter the 16th to 30th locations, touch [ , ]
to scroll to the next page.
?
What if an entered page number is larger than the total original page count?
% The insertion images will be added at the end of the finished set.
?
Should the page number be entered from the smaller number?
% Not necessary. Insertions occur in sequence even if original page numbers are entered out of
sequence.
? What if the same page number is entered twice or more?
% The images will be inserted at specified location by the entered count.
5
If desired, select the Booklet Pagination function as follows.
– Touch [Booklet Pagination] on the Insert Image Screen, then select the desired mode. For details,
see page 11-17.
– Touch [OK] to complete the setting and return to the Insert Image Screen.