Oce CS665 Pro, Copy Operations

Page: 206 / 493

8 Before making copies
8-14 CS665 Pro
Positioning the original in Z-folded mode
Z-Folded mode detects the folded original size without using the size detection sensor of the ADF.
For the sizes available in the Z-Folded mode, see page 3-13.
1
Arrange the original in order.
2
Position the original FACE UP (with page one UP) in the ADF.
– The direction of the original should conform to the original direction icon displayed on the Copy
Screen.
Up to 100 sheets of the original can be set at a time.
3
Adjust paper guides.
2
Reminder
Once closed, do not open the document feeder, otherwise the selected copy conditions may be altered
automatically.
!
Detail
To use the Z-Folded original mode, see procedure on page 9-10.
8.3.2 Positioning the original on original glass
Use the original glass when the original is not suitable for use with the ADF, e.g., when size is incompatible,
or when the original is folded, stapled, torn, or in generally poor condition.
!
Detail
For details of the original unavailable in the ADF, see page 3-13.
0 Copy result may not be satisfactory if the original should not be positioned correctly, especially when
using duplex mode, Staple, Half Fold, or Booklet Pagination. See page 9-3 for details.
0 When Book Copy, Auto mode in Repeat, or Image Centering is selected, the ADF should be kept open
while scanning the original. For details on each function, see Section 11.
1
Raise the ADF.
2
Position the original FACE DOWN in the left rear corner,
aligning the edge with the left measuring guide.
– The direction of the original should conform to the Original
direction icon displayed on the Copy Screen.
3
Gently close the ADF to prevent the original from shifting on the glass.