Oce CS665 Pro, Copy Operations

Page: 465 / 493

CS665 Pro 13-9
Advanced information 13
The Mode Memory Screen will be restored.
?
What if any correction is required?
% Touch [Cancel] to return to the Copy Screen. Make new selections, then restart the operation from
step 2.
5
Touch the desired job key, then touch [OK].
– The job keys numbered from 01 to 18 are displayed on the screen. Touching [Next] will display the
keys from 19 to 30.
– A blank keys without a lock icon indicate that no job is stored under that key, and a named job
without a lock icon displayed can be overwritten.
The key with a lock icon displayed is locked and cannot be selected.
– Touch [OK] to proceed to the screen for entering the job name.
6
Enter the desired job name, then touch [OK].
– Enter a job name in up to 16 characters, using the touch panel alphabet keypad.
– Use arrow keys [ * ] and [ ) ] to move the cursor, and use [Shift] to enter upper case letters or
symbols.
– Touch [OK] to complete the setting and return to the Mode Memory Screen. Check that the job
name has been correctly entered.
7
Touch [OK] on the Mode Memory Screen to complete the setting and return to the Copy Screen.
2
Note
If you do not wish to enter a name, simply touch [OK]. The key displays 16 asterisks (*) in place of a
name.