Oce CS665 Pro, Copy Operations

Page: 447 / 493

CS665 Pro 12-65
Output applications 12
12.10 Cover sheet feeding (Paper inserter)
The Finisher FS-520/FS-607 with Paper inserter PI-502 installed can attach cover sheets to output copies.
Using Insert Sheet function, cover sheets loaded in the upper and lower trays of the paper inserter will be
attached as a front cover and/or back cover or insertion sheet to output copies, and also using Staple mode,
a covered and stapled book can be made.
Or, using Cover with Blank Sheet mode of Booklet Pagination and Multi Half Fold/ Fold&Staple with Trimming
mode on the machine with Finisher FS-607, a booklet-type cover will be attached to the multiple page
signature booklets.
Paper setting for the covers to be loaded in paper inserter is required. See page 9-33 for details.
0 Upper/Lower tray capacity: 200 sheets (50 to 200 g/m
2
paper) or within 30 mm thick each
0 Use ADF.
0 The cover paper size should be the same as copy paper size.
0 Max. 30 insertions are available including front and back covers, with page designation ranging from 1
to 999.
0 Cover paper loaded in the paper inserter cannot be copied.
1
Load cover paper into the upper and lower trays of the paper
inserter.
2
Use Insert Sheet or Booklet Pagination function to attach covers to the output copies.
Cover sheet
Copied set with
covers and insertions
Copied set with
cover attached in
staple mode
attached
Upper tray
Lower
tray