Oce CS665 Pro Copy Operations Download Page 464

Page: 464 / 493

Advanced information

13-8

CS665 Pro

13.4

Storing and recalling job conditions: Mode memory

Use Mode Memory to store frequently used copy job settings, which can be recalled at any time.

13.4.1

Storing job conditions

Follow the procedure below to store the copy job setting.

Available settings: Basic setting, Original Setting, Special Image, Application, Output Application, Print
quantity

Stored job is given a job number (01 ~ 30) and alphabetical name (dispensable).

Up to 30 jobs can be stored.

Make job selections from the Copy Screen.

Press [Mode Memory] on the control panel.

The Mode Memory Screen will be displayed.

Touch [Store].

The Job Store Check Screen will be displayed.

Review the settings, then touch [OK].

Summary of Contents for CS665 Pro














































































































































































































































































































































































































































































































Search results

Summary of Contents for CS665 Pro

Reviews:

Related manuals for CS665 Pro

Brands by name

Popular brands

Oce CS665 Pro, Copy Operations

Search results

Summary of Contents for CS665 Pro

Reviews:

Related manuals for CS665 Pro

Brands by name

Popular brands