Oce CS665 Pro, Copy Operations

Page: 177 / 493

CS665 Pro 6-7
Maintenance 6
6.3 Cleaning conveyance belt of saddle stitcher tray
The conveyance belt of saddle stitcher tray should be kept clean, otherwise soil marks may be copied. Follow
the procedure below to clean the conveyance belt.
In order to maintain optimum copy quality, we recommend to clean it every time before using the saddle
stitcher tray.
To clean the conveyance belt
1
Fully withdraw the saddle stitcher tray, then open the tray stand.
– Never fail to open the tray stand, otherwise the machine may be damaged.
2
Clean the surface of the two conveyance belts with a soft cloth
dampened slightly with alcohol (cleaner).
3
Move the conveyance belt to clean the whole length.
– Raise the two belts lightly, then pull them both forward at
the same time in order to show the hidden parts.
– Do not raise the belt higher than need be, or never fail to pull
the two belts at the same time; otherwise machine trouble
may be caused.
– Clean the belts in the same way as above, using a soft cloth
dampened with alcohol.
– Repeat steps 2 and 3 (about three times) to clean the whole
round of the belt.