Oce CS665 Pro, Copy Operations

Page: 25 / 493

CS665 Pro 1-19
Introduction/Safety information 1
Output for machine with Finisher FS-607 installed
Non-Sort, Collate, Uncollate, and Staple modes using the primary (main) tray
Collated and Uncollate modes using the secondary (sub) tray
Fold&Staple, Multi Half Fold, and Multi Tri-Fold modes using the folding mode tray
Selects an output tray and output mode on the Output Application Screen.
Output for machine with Large capacity stacker LS-505 installed
Non-Sort, Collate, and Uncollate modes using the stacker
Collated and Uncollate modes using the stacker secondary (sub) tray
Selects an output tray and output mode on the Output Application Screen.
Output for Finisher FS-521 with Folding unit FD-503 installed
Punch
Folding (Z-Fold, Tri Fold-in, Tri Fold-out, Double Parallel, Gate Fold, Half Fold)
Cover sheet feeding
Output for machine with Saddle stitcher SD-506 installed
Fold & Staple, Trimming
Folding (Multi Half Fold, Multi Tri-Fold)
Output for machine with Perfect binder PB-501/PB-502 installed
Perfect Binding, Trimming
Page margin
Creates or removes a binding margin at the top, bottom, right and left edges (shift amount from 0 ~ 250mm,
in 1mm increments); reduces image to prevent image loss (reduce & shift amount from 0 ~ 250mm, in 1mm
increments).
Program overlay
Same as for Image Overlay except the overlay image is stored in memory.
Power save
Automatically turns off all but nominal power supply after a specified period of copier inactivity, for optimal
efficiency. Power is returned after a brief warm up period by pressing [Power Save] on the control panel.
Program job
Scans documents into memory while designating different copy conditions for each original, then prints all
the documents collectively.
Proof copy
To ensure correct output before running multiple copies, run a proof copy by pressing [Proof Copy] on the
control panel or touching Proof Copy on the Check Screen.
Reserve
Scans in subsequent copy jobs while the machine is busy printing or copying.
Rotation
Rotates the image before copying when the portrait/landscape orientation of the original is different from the
orientation of the copy paper.
Separate scan mode
Scans documents into memory from the original glass and/or the document feeder and inserts the pages into
another document copied from the document feeder. If an incompatible function is selected in this mode, the
latter function will not be selected, and an Error message will be displayed.
Simplex/duplex
Selects the desired simplex mode (1-1 or 2-1); or duplex mode (1-2 or 2-2).