Oce CS665 Pro, Copy Operations

Page: 123 / 493

CS665 Pro 4-19
Supplies & handling 4
To load tabbed sheets in paper feeder unit trays (tray 4 and 5)
0 The tray paper type should be specified as tabbed sheets. See page 9-33 for the details of Paper
Setting.
0 Example: 9 tabbed sheets loaded in position for 3 finished sets
1
Withdraw the tray to be loaded with tabbed sheets.
2
Place tabbed sheets on the tray.
– Place paper referring to the illustration shown above.
3
Move the side guide plates to the edge of the paper.
– Set paper aligning it to the paper feed roller side of the tray.
– Press the release lever of the front side guide plate to move the side guide plates, and also move
the rear edge guide to the edge of the paper.
4
Push in the tray until it locks into place.
2
Reminder
Do not load above the limit level on the side guide plate.
Be sure that the side guide plates and rear edge guide are securely aligned to the paper; otherwise the
machine cannot detect the correct paper size, or machine trouble may occur.
1st TAB
2nd TAB
3rd TAB
1st TAB
2nd TAB
3rd TAB
3 FINISHED SETS