Oce CM4520 User Manual Download Page 73

Page: 73 / 346

Transmission

3-36

Network Fax

Trans

ission

r 3

3.6.4

To Confirm/Delete a Destination

You can confirm or delete selected destinations.

Press [Fax] on the control panel and press [Mode Check].

Press [Destination].

–

For the IP Address Fax, [Comm. Setting] and [E-mail Setting] are
not used.

–

In the color mode, [Communication. Setting] and [E-mail Setting]
are not displayed.

Confirm destinations.

To delete a destination, select the destinations to be deleted in the list
and then press [Del.].

–

Pressing [Details] displays the detail information screen.

–

Pressing

displays the previous or next screen.

The message screen appears.

Press [Yes].

In the case of the monochrome mode

In the case of the color mode

Summary of Contents for CM4520



























































































































































































































































































































































Search results

Summary of Contents for CM4520

Reviews:

Related manuals for CM4520

Brands by name

Popular brands

Oce CM4520, User Manual

Search results

Summary of Contents for CM4520

Reviews:

Related manuals for CM4520

Brands by name

Popular brands