Oce CM4520 User Manual Download Page 147

Page: 147 / 346

Useful Functions for Reception

8-4

Network Fax

Useful

Functions for Reception

Chapter 8

8.1.2

Deleting a Document Held in Memory

Perform the following procedure to delete the document received and held
in memory.

Press [Box] on the control panel to view the Box screen, if it is not
already displayed.

Select [System User Box] tab and press [Memory RX User Box].

Enter the password and press [OK].

–

To interrupt operation, press [Cancel].

–

If you press [C] (clear), the information you have entered will be
deleted.

Select the received document using

and press [Delete].

Press [Yes] on the displayed confirmation screen.

The designated document will print.

Detail

To interrupt operation, press [Close] before pressing [Print].

Pressing [Proof Print] lets the first page in the selected file be printed out,
allowing you to confirm the contents.

Summary of Contents for CM4520



























































































































































































































































































































































Search results

Summary of Contents for CM4520

Reviews:

Related manuals for CM4520

Brands by name

Popular brands

Oce CM4520, User Manual

Search results

Summary of Contents for CM4520

Reviews:

Related manuals for CM4520

Brands by name

Popular brands