Oce CM4520, User Manual

Page: 36 / 346

Before Use 2
Network Fax 2-13
Befo
re Use
Chapter 2
2.8.2 Must-Set Items (IP Address Fax)
!
Detail
When using the IP Address Fax function, this requires the service
engineer to make the setting. For details, contact your service
representative.
For details, see "Utility Mode" on page 10-2.
After installation, you must set the following items to use the IP address fax
functions. You will not be able to execute the FAX communication if these
items are not set properly.
- Administrator/Machine Setting
– Administrator Registration
E-Mail Address
- Network Setting
– TCP/IP Setting
– Network Setting>Network Fax Setting>Network Fax Function Settings >
IP Address Fax (ON/OFF*)
– Network Fax Setting
SMTP TX Setting (Port No., Connection Timeout)
SMTP RX Setting (SMTP RX (ON*/OFF), Port No., Connection Timeout)
- Fax Setting
– Network Fax Setting
Black Compression Level (MH*/MR/MMR)
– Report Settings
Network Fax RX Error Report (ON*/OFF)
– Header Information
The Header Information is normally shared with the G3 fax.
* indicates factory default setting.