Oce 9800, User Manual

Page: 15 / 148

Using the Océ 9800 Printer 15
Display
The operating panel is used to (re-)start and stop the printer. The display
provides feedback about print job status and memory content. The section and
function buttons above and below the display allow you to access (default)
printer settings.
The display provides information about:
■
the number of (sets of) prints which remain to be produced for the current
job.
■
the memory indicator shows the amount of memory that is currently in use,
along with the number of jobs in memory and the time it will take to print
these jobs.
■
the roll indicator shows the type of copy media that is currently loaded on the
different rolls in the printer.
■
current system status, for example: ‘Warming up’. In the event of an error in
the printer, the exact error location (covers or panels) is graphically shown
on the display, along with instructions on how to solve the problem.
[5] Section, card selection, function, and higher/lower buttons
You can use the operating panel to specify machine settings and default
settings:
■
Machine settings can not be overruled by job-specific printer settings.
Examples of machine settings are: changing the timer/clock, specifying the
higher/lower
buttons
section buttons
function buttons
card selection button
................ ................
Program Copy
................
Finishing
Ready to print
................
Machine
KEY
Prints:
3
key operator button
system status
Time:
Jobs:
7
0: 11
memory indicator
Roll indicator
Roll 2
A2 Bond
Roll 4
A0 Bond
Roll 1
A3 Bond
Roll 3
A1 Bond
.....................
Print
Processing.
..............................