Oce 9800, User Manual

Page: 103 / 148

Problem solving 103
[90] Crank.
7
If the paper keeps coming, it is not cut and it must be manually cut.
8
Open the pre-heater section by pressing handle 1 down (see figure 91).
9
Pull both green catches (2) towards you and release handle 1 (see figure 91).
10
Pull the green bar (3) towards you (see figure 91).
[91] Opening the pre-heater section
11
Cut the paper and turn the crank clockwise to deliver the jammed paper.
12
Refer to ‘Clearing a paper jam in the roll feed section’ on page 104.
13
Remove the crank and return it to its original position.
Close as follows:
1
Push bar 3 to the rear.
2
Press handle 1 downwards.
3
Press both green catches (2) to the rear.
4
Close the bar of the fuser section.
5
Close the lower cover of the output unit.
6
Unlock the green bar and close the top cover.
1
2
2
3