Oce 9800, User Manual

Page: 86 / 148

86 Océ 9800 Printer User Manual
Reset functions
The system administrator can make use of the following functions in the
‘Machine’ section:
■
Restore factory default settings
■
Reset controller
Restoring controller to factory default settings
The system administrator can use the Reset configuration function to undo all
changes which may have been made to the Océ 9800 controller settings.
▼
Restoring factory default settings
1
Open the ‘Controller’ card in the ‘Machine’ section (see figure 71).
[71] Controller card
2
Press the ‘Reset config.’ button.
3
Press the Start button to confirm.
All changes will be undone and the system will be restored to its default status.
4
When finished, exit system administrator mode.
Resetting controller
If a controller error cannot be solved by resetting an error message, you can
reset the entire controller without turning the printer off.
Reset
Ready to print
..................................... ..................................... ..................................... ..................................... .....................................
......................................................................................................................................
................
Connect
...............
Language
................
Program
Prints:
0
General
Folding
length
Controller
Print
settings
................
Machine
Reset
config.
Reset
error
Test
print
Reset
controller