Oce 9800, User Manual

Page: 81 / 148

System Administrator 81
Pens
Note:
The following default print settings are usually overruled by settings that
are sent along with the print job.
Pen settings can be changed in the Pen menu. You can change the default width
and pattern for each pen number. These settings apply to all vector languages:
HP-GL, HP-GL/2 and Calcomp.
▼
Defining the default pen settings
1
Open the ‘Pen menu’ card in the ‘Language’ section (see figure 67).
2
Press the ‘Pen number’ function button.
[67] Selecting a pen
3
Use the higher/lower buttons to select the desired pen and to define its pattern
and width.
4
When finished, exit system administrator mode.
Pen Priority
For HP-GL/2 and Calcomp files, you must also define the Pen
Priority:
■
Language:
The pen settings definition in the plot file will be used.
■
Remote:
The default pen settings will be used, unless they are overruled by settings
sent by the printer driver with the print job.
See ‘Defining Pen priority for Calcomp or HP-GL/2 files’ on page 82.
Ready to print
..................................... ..................................... .................................. ..................................... .....................................
General
................ ................
Machine Connect
...............
Language
................
Program
Prints:
0
Formats
Folding
length
width
Pen menu
Pen number
1
Width:
0.19 mm
16
Pattern:
Automatics