Oce 9800, User Manual

Page: 104 / 148

104 Océ 9800 Printer User Manual
Note:
If the problem has not been solved despite your efforts, open the output
transport unit by pulling it towards you (see figure 92) and look for jammed
paper there.
[92] Opening the transport output unit
Note:
If the fuser section covers continue to flash on the display, re-check the
fuser section.
Clearing a paper jam in the roll feed section
The roll feed section is indicated as section B (see figure 83).
Note:
Make sure that you have solved all problems in the fuser section before
you solve the problem in the roll feed section.
▼
Clearing a paper jam in the media roll compartments
1
Open the appropriate media roll compartment completely.
2
Remove any jammed paper:
■
behind the chip tray (see figure 94) or the vertical transport (see figure 95)
■
underneath the plate (see figure 96)
■
underneath the roll 2 or roll 4 feed plate (see figure 97).
If the system asks you to re-load the roll, then re-load the roll.
3
Close the media roll compartment.
▼
Removing paper from behind the chip tray or vertical transport
1
Turn the green knob of the chip tray (upper compartment) or the vertical
transport (lower compartment) (see figure 93).