Oce 9800 User Manual Download Page 143

Page: 143 / 148

143

User comment sheet

Did you find this manual to be accurate?

❏

Yes

❏

Were you able to operate the product after reading this manual?

❏

Yes

❏

Does this manual provide enough background information?

❏

Yes

❏

Is the format of this manual convenient in terms of size, readability and
arrangement (page layout, chapter order, etc.)?

❏

Yes

❏

Were you able to find the information you were looking for?

❏

Always

❏

Most of the time

❏

Sometimes

❏

Not at all

How did you find the information you were looking for?

❏

Table of contents

❏

Index

Are you satisfied with this manual?

❏

Yes

❏

Thank you for evaluating this manual.
If you have other comments or concerns, please explain them, or suggest
improvements, on the overleaf or on a separate sheet of paper.

2986906

Summary of Contents for 9800





















































































































































Search results

Summary of Contents for 9800

Reviews:

Related manuals for 9800

Brands by name

Popular brands

Oce 9800, User Manual

Search results

Summary of Contents for 9800

Reviews:

Related manuals for 9800

Brands by name

Popular brands