Oce 9800, User Manual

Page: 73 / 148

Key operator 73
Defining automatic roll change
Enabling ‘Automatic roll change’ will cause the printer to switch to another
roll loaded with the same copy material and format when the first roll is used
up during printing. Disabling ‘Automatic roll change’ causes the machine to
stop printing once the selected roll is empty and to ask you to load a new roll.
Note:
The machine is unable to detect the type of media loaded on the copy
material roles. This should be specified as described in ‘Defining the type of
media’ on page 93.
▼
Turning ‘Automatic roll change’ on and off
1
Open the ‘Copy size’ card in the ‘copy’ section.
2
Press the ‘Automatic roll change’ function button to switch the automatic roll
change function on or off (see figure 63).
[63] Turning ‘Automatic roll change’ on and off
3
When finished, exit key operator mode.
Ready to print
..................................... ..................................... ..................................... ..................................... .....................................
Copy
Copy
A3 >>
A2 >>
................
Machine
................
Finishing
................
Program
Prints:
0
................
Copy
Image
size
mediamedia
selection
A1 >>
A0 >>
A2
A2
A2
A2
Copy
length
Standard cut
Synchro cut
A4 >> A2
Auto format
selection Automatic
roll change
210 mm