Oce 9800, User Manual

Page: 135 / 148

135
Removal of NiCad battery
This machine is equipped with a nickel-cadmium battery containing
substances which could pollute the environment if improperly handled. After
the battery is removed from the machine, it should be disposed of in an
environmentally safe manner and in conformance with local laws and
regulations.
If you have an Océ maintenance contract, Océ service personnel will remove
the battery and properly dispose of it, if required. If you do not have a
maintenance contract with Océ, battery removal should be carried out as
follows:
▼
Removing the NiCad battery from the printer
Attention:
Océ accepts no liability for any damages resulting from removal
of the battery by persons other than Océ service personnel.
1
Before removing the battery, turn off the machine and disconnect the power
supply.
2
Remove the cover at the left-hand side (see figure 119).
[119] Cover of the main engine
3
Loosen all of the cpu-io board connectors.
4
Loosen the screws of the printed circuit board assembly.
5
Remove the print board.
6
Remove the blue plastic holder (containing the battery) from the printed circuit
board.