Oce 9800, User Manual

Page: 57 / 148

Default printer settings 57
▼
Adjusting the side guides of the belts
1
Loosen the fastening screws (see figure 49).
[49] Adjusting the side guides of the belts
2
Adjust the plate in accordance with the width of the fold package.
3
Tighten the fastening screws.
Note:
If you change the folding width and/or the folding length, you must
adjust the punching unit.
▼
Adjusting the punching unit
1
Open the door at the front of the high capacity output unit.
2
Turn the black knob to adjust the folding width (see figure 50). Refer to the
sticker inside the unit.
[50] Knob for adjusting the folding width in the punch unit
3
Loosen the fastening screw and position the plate in accordance with the
folding length (see figure 51).