Introduction
1.
Introduction
1.1 General Description
The RosieScan (“Device”) is a noninvasive ultrasound device used to measure urinary bladder volume.
During each scan, the RosieScan creates a three-dimensional image of the bladder. This image is then
used to automatically calculate and display the urinary bladder volume. The results of the scan may be
stored internally, printed using the on-board thermal printer or transferred to an external computer
using a USB connection.
The RosieScan can be programmed to make calculations based on a male, female or pediatric bladder
before each scan. The RosieScan can store up to 100 patient I.D.s and measurements. When the
memory is full the results may be transferred to an external computer and the on board memory can be
cleared.
1.2 Primary Components
The RosieScan consists of a Main Unit, Probe (standard frequency 2.6MHz), two Batteries, a USB cable,
Adapter and Charger.
1.3 Intended Use
The device is intended to provide a noninvasive means of measuring urinary bladder volume by a
licensed medical professional. All users must read this entire manual prior to using the RosieScan.
Failure to comply with these instructions may compromise the performance of the device and the
accuracy of its measurements.
Immediately after unpacking your new RosieScan, refer to the parts list below to ensure that all parts
are included in your package. Also verify that the user’s manual, maintenance document and all
accessories are included.
RosieScan Packing List
No.
Name of Parts
Quantity
1
Main Unit
1
2
Probe
1
3
Adapter
1
4
Charger
1
5
Battery
2
6
USB Cable
1
7
Cross Screwdriver
1
8
Certificate
1
Page
6
