Nuova Simonelli TALENTO, Service Manual

Page: 30 / 200

Edition 02 to 12/2013
2.16
SERVICE MANUAL
2.3.5 EASYCREAM
Use a flathead screwdriver on the top right side
of the machine to adjust the air and therefore, the
foam in the milk. Turn anticlockwise to increase
foam and clockwise to reduce it. We recommend
performing this operation while actually pouring
steam in the milk.
2.3.6 ADJUSTING KNOB
After found the right milk and Easycream foam
adjustment is it possible to fix the plastic knob
available in the box.
The knob has a pin to reduce the setting range
available for the end customer ½ turn,
1 Put the pin in the centre of the slot.
2 Fix the knob tightening the 2mm allen screw
in the bottom part inside the door.
2.3.7 COLD MILK
With a flathead screwdriver at the top left side
(rear part) of the machine, adjust the air and
therefore, the milk foam:
1 Turn anticlockwise to increase the foam.
2 Turn clockwise to reduce the foam.
This operation should be performed while cold
milk is being poured.
+
_
Fig. 36
Fig. 37
Fig. 38
1 2
Fig. 39