Nuova Simonelli TALENTO, Service Manual

Page: 106 / 200

Edition 02 to 12/2013
10.6
SERVICE MANUAL
To remove the hot water wand, it’s necessary to:
1 Slide out the red pipe located inside the door.
2 Remove the three 2,5 mm hex-head screws.
Being sure to support the Glass before
removing the last screw.
3 Remove the wand from the front of the
machine.
In the picture, we can see all parts of the wand,
especially the teflon seal, which makes wand
movement more rigid in line with the tightness of
the lock screws.
10.6 GLASS REPLACEMENT
To remove the right-hand glass it is necessary to:
1 Remove the steam wand (see par. 10.5).
2 Using a phillips head screwdriver, remove the
bottom part of the front door.
3 The glass is attached to the door via bayo-
net fitting and can be removed by sliding it
downwards.
Remember to support the glass by the hole
for the steam wand to prevent it from acci-
dentally falling.
1
Fig. 14
3
Fig. 15
Fig. 16
3.1
3.2
3
Fig. 17