Nuova Simonelli TALENTO, Service Manual

Page: 121 / 200

Edition 02 to 12/2013
11.13
SERVICE MANUAL
Press ENTER to open the sub menu.
The keys are used to increase/
decrease the number of cycles (0 - 10 - 20 - 40 -
80 - 160 - NO LIMIT);
with 0 the machine enters
block mode immediately when the “WASHING”
alarm appears; with 10 - 20 - 40 - 80 - 160, the
machine enters block mode after 10 - 20 - 40 -
80 - 160 pours; with NO LIMITS the machine will
not enter block mode.
Press ENTER to confirm settings.
11.4.11 Milk clean warning
(Milk washing alarm)
Press ENTER to open the sub menu.
This programme the number of hours from the
last milk beverage being poured, after which the
cappuccino maker cleaning warning is displayed.
The keys are used to increase /
decrease the number of hours before the cap-
puccino maker clearing message is displayed
(min. NO LIMIT – max. 12H).
Press ENTER to confirm settings.
11.4.12 Sequential heating
Press ENTER to open the sub menu.
The keys are used to enable/
disable the SEQUENTIAL HEATING function
(YES – NO) . With the SEQUENTIAL HEATING
function enabled, YES , the control board will first
heat up the coffee heating element and then the
services heating element; with the
SEQUENTIAL
HEATING function disable, NO , the control board
will heat the two boilers at the same time.
11.4.13 Prog on off
(Programming automatic
switch on/off)
This is to program the automatic ON/OFF times
for the machine.
The default setting is for the machine to be set to
“STANDBY” every day of the week and therefore,
it needs to be switched on/ off using the ON/OFF
botton.
Press ENTER to open the sub menu and
the display will show as follows:
MONDAY
The keys are used to view the set-
tings for each day of the week.
Press ENTER to set the required day of
the week; the keys are used to
select the hour and minutes for switching on and
the hour and minutes for switching off.
MONDAY
ON HOURS
MONDAY
OFF HOURS
MONDAY
ON MIN
MONDAY
OFF MIN
MONDAY
DAY OFF