Nuova Simonelli TALENTO, Service Manual

Page: 92 / 200

Edition 02 to 12/2013
9.6
SERVICE MANUAL
9.2 MILK CIRCUIT
TALENTO SPECIAL
The new milk system produce an higher density
cream. Furthermore it’s possible to prepare dif-
ferent temperature beverages and also to obtain
the “cold milk foam”, a cold milk cream beverage
for the milk products lovers.
9.2.1 MILK PUMP AND
CAPPUCCINO MAKER
To access the milk pump and cappuccino maker,
the engineer will need to:
1 Switch off the machine.
2 Remove the grounds drawer.
3 Turn the key anticlockwise.
4 Open the front panel.
At the left side of the group are:
A milk pump 24V
B cappuccino maker
C capillary tube for milk
To remove the cappuccino maker,
5 slide out the top part of the cappuccino
maker and remove it moving it up.
6 remove the steam injector.
7 remove the capillary tube for milk, paying
attention to the plastic part: it’s fragile.
8 remove the milk pipe.
3
2
1
4
Fig. 15
A
B
C
Fig. 16
7
6
5
8
Fig. 17