NuAire ecosmart CONNECT XBOXER XBC, Installation, Control Details, Operating And Maintenance

Page: 37 / 64

37 nuaire.co.uk
XBOXER XBC ECOSMART (CO) MODELS
10.0 SA BUS DEVICES
2 1
On
(Closed)
Off
(Open)
2
1 4
On
(Closed)
Off
(Open)
30. 11. 15. Leaflet Number 671710
10.7 SENSOR ADDRESSING
ESCO-TDFS has a fixed device address of 199 on the SA Bus. The address can
be changed on other models via DIP switches on the PCB rear.
The designation of each address is shown in the following table.
Address Range Type Module Type
199 Fixed Multi-function (with Fan
Speed Override)
200-203 Adjustable Multi-function
212-219 Adjustable Room CO2 Sensor Module
Each sensor on the SA bus must have a unique address. The default controller
strategy is preconfigured to automatically detect all Room Modules on the
network and react accordingly.
200-203 Address Switch Settings
Address Switch Settings
Switch 2 Switch 1
200 OFF OFF
201 OFF ON
202 ON OFF
203 ON ON
212-219 Address Switch Settings
Address Switch Settings
Switch 4 Switch 2 Switch 1
212 OFF OFF OFF
213 OFF OFF ON
214 OFF ON OFF
215 OFF ON ON
Not supported ON ANY ANY
10.8 ROOM MODULES TECHNICAL SPECIFICATIONS
Supply Voltage 15VDC (Powered from SA bus)
Temperature Measurement Range 0 to 40°C
Humidity Measurement Range 0 to 100% (Full)
10 to 90% (Calibrated)
Temperature Sensor Type Local 1k ohm Platinum
Resistance Temperature
Detector (RTD);
Class A per IEC 60751
Humidity Sensor Type Thin Film Capacitive Sensor
Temperature Resolution (Models with ±0.5C°
LCD)
Default Temperature Setpoint 10°C to 30°C
Adjustment Range
PIR Occupancy Sensor Motion Detection Minimum 94 Angular Degrees
up to a Distance of 15 ft (4.6m);
Based on a clear line of sight
Ambient Operating Conditions 10°C to 30°C 10 to 90% RH
(Temp Probe -10°C to 60°C)
Ambient Storage Conditions -20 to 60°C 5 to 95% RH
CO2 Sensor Warmup time Less than 1 Minute; less than
10 minutes for full accuracy
(MS/TP)