NuAire ecosmart CONNECT XBOXER XBC, Installation, Control Details, Operating And Maintenance

Page: 11 / 64

11 nuaire.co.uk
XBOXER XBC ECOSMART (CO) MODELS
A
C
E
F
B
D
Figure 11: Installing the Weatherproof Roof, Exhaust & Intake Terminals.
5.1 INSTALLING THE XBC WEATHERPROOF ROOF
ON ECOSMART (CO) FAN UNITS
CODE DESCRIPTION:
EXAMPLE WEATHERPROOF ANCILIARY CODE:
XBC15-H-WP-CO
30. 11. 15. Leaflet Number 671710
Having installed the ventilation unit and attenuators, the
Weatherproof Roof can now be installed if required.
The Roof assembly and control cover must be secured to the unit using
the fixing channel provided. In order to fit the weatherproof cover, the
four existing external hanger brackets must be removed.
When the roof has been installed onto the fan unit please ensure that
the edges of the roof are fully sealed where it joins the fan unit.
This does not apply to the control cover as this will have to be removed
if necessary.
WEATHERPROOF COMPONENTS
Item Description Quantity
A Roof Assembly 1
B Control Cover 1
C Fixing Channel 4
D Control Lid with Heater 1
OPTIONAL EXHAUST & INTAKE TERMINALS
Item Description Quantity
E Exhaust RT 1
F Intake RT 1
UNIT CODES FOR OPTIONAL
EXHAUST & INTAKE TERMINALS
XBC10-EXHAUST-RT
XBC10-INTAKE-RT
XBC15-EXHAUST-RT
XBC15-INTAKE-RT
XBC25-EXHAUST-RT
XBC25-INTAKE-RT
XBC45-EXHAUST-RT
XBC45-INTAKE-RT
XBC55-EXHAUST-RT
XBC55-INTAKE-RT
XBC65-EXHAUST-RT
XBC65-INTAKE-RT
The weatherproof control lid is supplied with a built in
thermostat and heater for low temperature and anti-
condensation applications.
The lid is equipped with a live, neutral and earth flying leads for
connection into the control panel.
To remove the cover, first disconnect the heater power connector
behind the small access cover. The cover will then lift off as
normal.
The thermostat should not be set any higher than 10
O
C.
Caution, the heater may retain some residual heat even when
disconnected.