NuAire ecosmart CONNECT XBOXER XBC, Installation, Control Details, Operating And Maintenance

Page: 27 / 64

MAC Address
BACnet Device ID
27 nuaire.co.uk
XBOXER XBC ECOSMART (CO) MODELS
Device Name
Mac Address
4
Device ID 0
Select Target Device
Object Type AI
Object ID 10050
Select Target Device
TL-BRTRP-0 0 1
Nuaire XBC ESC 4 0909501
Nuaire XBC ESC 5 0909502
Name Description Status Function
Write ID
9.0 FC BUS DEVICES
30. 11. 15. Leaflet Number 671710
Figure 21:
Network Page Description Object Type Object ID
17 Room Air Temp AV 11296
17 CO2 Level AV 13980
17 Humidity AV 14297
17 Active Setpoint AV 14534
1 Fresh Air Temperature AI 10008
9.5 QUICK SETUP
The following section explains how to quickly set-up the FAD with a target
object and some favourites.
9.5.1 SETTING UP A TARGET OBJECT
Target objects allow the user to view a “target” device and object within
the entire network.
To choose a target object
l
Navigate to the settings page.
l
Select the right arrow four times to reach the
Select Target Device screen.
l
Enter the physical MAC address* of the controller (Device names or
BACnetIDs can also be used but MAC addresses are shorter)
l
Select the right arrow once
l
Enter the object type of the required object (Eg AI, AO, MSV)**
l
Enter the BACnet ID** of the object. (0-4194304)
l
Select the home icon.
* This is the setting of the DIP switch on the front of the FAC controller.
This can also be discovered by browsing to the network screen while ID is
selected in the View Config settings screen.
** Popular object details are listed below, or use the network browser or see
“Exposed BACnet Object List” for a full list.