NuAire ecosmart CONNECT XBOXER XBC, Installation, Control Details, Operating And Maintenance

Page: 29 / 64

29 nuaire.co.uk
XBOXER XBC ECOSMART (CO) MODELS
Backlight Stand-By-OFF
Home Page Target
Service Password 0
User Password 0
Stand By Dark
Stand By Timer 0
Display Settings
Backlight Stand-By-OFF
Home Page Target
Service Password 0
User Password 0
Stand By Dark
Stand By Timer 0
Display Settings
Name Description Status Function
Write ID
View Config
NS Zone Temp 0°C
NS Zone 1 Temp 0°C
NS Zone 2 Temp 0°C
NS Zone 3 Temp 0°C
Name Description Status Function
Write ID
View Config
9.0 FC BUS DEVICES
30. 11. 15. Leaflet Number 671710
Figure 23:
Note: If the target page or favourite page is selected as the home page and a
security password is set, the home page will be locked. The only way to exit
the target screen in this case is to press the Nuaire logo to the top right of
the screen for 5 seconds. A security password will then be requested to
access the main menu. The security password timeout is the same as the
standby timer and set via the display settings.
9.5.3 SETTING UP SECURITY
9.5.3.1 TO SET A USER PASSWORD
l
Navigate to the settings page
l
Select the right arrow twice to reach the display settings screen
l
Change the user password a 4 digit number
l
The user password will now be requested each time a locked object
is written
l
The user password is also needed to exit the target page. (When the home
page is set to target)
9.5.3.2 TO SET A SERVICE PASSWORD
l
Navigate to the settings page
l
Select the right arrow twice to reach the display settings screen
l
Change the service password a 4 digit number
l
The service password will now be requested each time the settings page
is accessed
9.5.3.3 TO DISABLE WRITING OF VALUES
l
Navigate to the settings page
l
Select the right arrow six times to reach the View Config screen
l
De-select the write tickbox. All controller points are now read only
l
A service password will need to be set to stop users re-enabling the
write function
9.5.3.4 TO ALLOW BASIC VALUES TO BE WRITTEN BY THE USER
l
Navigate to the settings page
l
Select the right arrow six times to reach the View Config screen
l
Select the function tickbox and lock
l
Select the home icon
l
Navigate to the network page.
l
Select the appropriate controller.
l
Navigate to the required object. See “Exposed BACnet Object List”
for a full list.
l
Select any values that need password protection. A black lock indicates
a locked value
l
When finished, navigate back to the View Config screen in the settings
section. Remove the Function tick and enable writing of values
l
A user password will need to be set to stop writing of locked values.
It is recommended that all values are locked except the following;
Network Page Description Object Type Object ID
32 Enable MSV 10218
25 Time Schedule SCH 10496
32 Fan Boost MSV 10240
28 Heat Boost MSV 10205
15 Software Setpoint AV 10309