NTT docomo FOMA SO906i, User Manual

Page: 59 / 550

57
V
oice/Videophone Calls
Entering a pause “P”
If you enter “P (pause)” between the phone
number and touch-tones when you book a
ticket or play back your home answering
m a c h i n e , t h e t o u c h - t o n e s a r e s e n t b y
separating the numbers at the pause (P).
1
Press in the phone number input
display.
“P” is entered.
To send touch-tones saved in the Phonebook
When the touch-tones are displayed after you
place a call from the Phonebook, press
(Call).
● Some receiver devices may not be able to
accept touch-tones.
Entering a timer “T”
To dial an inside line number following an
outside line number, enter “T (timer)” between
the outside and inside line numbers. After
a preset interval in seconds, the inside line
number is dialed following the outside line
number. An interval of about one second is
added for every timer (T) entry. You can enter
“T” consecutively to make the interval longer.
1
Press for over a second in the phone
number input display.
“T” is entered.
Entering a “+”
If you enter “+” at the beginning of a phone
number when the Auto conversion of the Int’l
dial assist setting is set to [ON], a call is dialed
by automatically adding the set international
access number (set to “009130010” at the time
of purchase).
1
Press for over a second in the
stand-by display.
“+” is entered.
● You may not be able to place the call if you enter
other than a phone number after “+” or enter only
“+”.
Switching to/from Voice/Videophone
Call
<Chg. to videophone/Chg. to voice call>
A caller can switch to/from voice/videophone
call during a call.

This function can be used only between terminals
that can switch between voice and videophone
calls. A recipient must preset the V.ph switch notice
to [Indication ON] (P.78).
Example: Switching from voice call to videophone call
1
Press (Func) during a voice call, select
[Chg. to videophone], and press .
Ｃｈａｎｇｅ ｔｏ
ｖｉｄｅｏｐｈｏｎｅ？
Ｙｅｓ
Ｎｏ
[Yes]:
Switch the call from voice call to videophone call.
[No]:
Return to the voice call without switching the call.
To switch from videophone call to voice call
From the Function menu, select [Chg. to voice
call]
→ [Yes]. When the call is switched to the
voice call, the hands-free operation is canceled.
Continued