NTT docomo FOMA SO906i, User Manual

Page: 246 / 550

244
Osaifu-K
eitai/T
or
uCa
Setting Whether to Check the
Duplication of a ToruCa(Detail) Card
You can set the FOMA terminal to check
if the ToruCa(detail) card you are trying to
obtain has been obtained already when you
obtain the card from a reading device or data
broadcasting/data broadcasting site.
1
From the Menu, select [Osaifu-Keitai]
→ [ S e t t i n g s ] → [ To r u C a s e t t i n g ] →
[Duplication check] and press .
[ON]:
Check if a target ToruCa(detail) card is already
obtained. Do not obtain a ToruCa card that you
have obtained already. Obtain a ToruCa card
only when you have not obtained it yet.
[OFF]:
Do not check if a target ToruCa(detail) card is
already obtained.
2
Select [ON]/[OFF] and press .
The Duplication check is set.
Setting Whether to Notify That within
the Communication Range
<IC act. notice>
You can set the FOMA terminal whether to notify
you of being within the FeliCa communication
range or the FeliCa communication being
started by vibration or the FeliCa Sign when
you are close to a reading device with the
FOMA terminal powered on.
1
From the Menu, select [Osaifu-Keitai] →
[Settings] → [IC act. notice] and press .
ＩＣ ａｃｔ． ｎｏｔｉｃｅ
Ｂｙ ｖｉｂｒａｔｏｒ
ＯＮ
Ｂｙ ＬＥＤ
ＯＮ
[By vibrator]:
Set whether to activate the vibrator when the
communication starts.
[By LED]:
Set whether to turn on the FeliCa Sign when
you enter the range in which communication is
enabled or when the communication starts.
2
Select [ON]/[OFF] of the vibrator at [By
vibrator].
3
Select [ON]/[OFF] of the FeliCa Sign at [By
LED].
● When the Public mode (Drive mode) is set, the
FeliCa Sign does not light and the vibrator does
not operate even if the By vibrator and By LED
are set to [ON].