NTT docomo FOMA SO906i, User Manual

Page: 482 / 550

480
Appendix/Exter
nal De
vices/T
roub
leshooting
Updating the Pattern Definitions
1
From the Menu, select [Settings]
→
[Management]
→
[Scan function]
→
[Update] and press .
Ｕｐｄａｔｅ ｐａｔｔｅｒｎ
ｄｅｆｉｎｉｔｉｏｎｓ？
Ｙｅｓ
Ｎｏ
2
Select [Yes]
→
[Yes] and press .
Ｒｅａｄｙ ｔｏ
ｓｅｎｄ ｙｏｕｒ
ｔｅｒｍｉｎａｌ ＩＤ？
Ｙｅｓ
Ｎｏ
Ｕｐｄａｔｅ
Ｄｏｗｎｌｏａｄｉｎｇ
When the pattern definitions are the latest available
There is no need to update the pattern definitions. Use them as is.
● When you update the pattern definitions, your FOMA terminal-specific information (such as
model and manufacturer’s serial number) is automatically sent to the server (server for the
scanning function under DoCoMo’s supervision). DoCoMo will not use the information sent
from your mobile phone for any purposes other than the scanning function.
● You cannot update the pattern definitions in the following cases:
- When the date/time is not set - When “ ” is displayed
- During a call - While the Self mode is set
- While the Lock all is set - While the Omakase Lock is set
- When the UIM is not inserted - When another function is being used
- When the FOMA terminal is connected to an external device such as a PC
- When the international roaming service is used
●
If you cancel the downloading operation before it is completed, the data downloaded until
this point is deleted.
Setting Whether Pattern Definitions Are Automatically Updated
You can set whether to update the pattern definitions automatically.
1
From the Menu, select [Settings] → [Management] → [Scan function] → [Set
auto-update] and press .
Ｓｅｔ ａｕｔｏ−ｕｐｄａｔｅ
ｏｆ ｐａｔｔｅｒｎ
ｄｅｆｉｎｉｔｉｏｎｓ
Ｖａｌｉｄ
Ｉｎｖａｌｉｄ
[Valid] : Update the pattern definitions automatically.
[Invalid] : Do not update the pattern definitions automatically.
2
Select [Valid] → [Yes] → [Yes] and press .
The Set auto-update is set.