SPLITMUX Quad Screen 4K 18GB Multiviewer
6
Note:
If the mounting ears will be applied such that the rear will face out, you will need to disassemble the cable tray from the
rear of the SPLITMUX as shown below. The cable management tray will not be used. Assemble the ear brackets to the holes
vacated by the screws securing the cable tray.
Figure 3- Remove cable tray (if applicable)
4. Install 4 cage nuts (provided) to the rack in locations that line up with the holes in the mounting ears on the SPLITMUX
assembly.
5. Secure the SPLITMUX to the rack using the four #10-32x3/4” screws provided. Be sure to tighten all mounting screws
securely.
