SPLITMUX Quad Screen 4K 18GB Multiviewer
10
POWER ON
When you plug in the AC adapter between the SPLITMUX and your power supply, with the power switch OFF (switch towards
“O”), the LED on the SPLITMUX will illuminate red after approximately 20 seconds. To use the SPLITMUX, press the power
switch to ON (switch towards “I”). After 20 more seconds the LED will change from red (standby) to green (ON). The
SPLITMUX is now powered up and ready to use.
When powering the SPLITMUX OFF, always press the power switch to OFF (switch towards “O”). Then wait 5 seconds or so
until the green LED changes to red. Once it is red, you can then safely unplug the SPLITMUX from the power source.
WARNING: If you unplug the power source before powering OFF the SPLITMUX at the power switch, you may lose saved
data and configuration information.
Figure 8- Power Switch and LED
