V-DVR5108/DVD / V-DVR5116/DVD 1.0 version - User’s manual
All rights reserved © NOVUS Security Sp. z o.o.
9
2.2. Electrical connection and other back panel elements
NV-DVR5116 View
1.
Fan cooling power supply unit, it shouldn’t be covered!
2.
VIDEO IN/LOOP
:
video inputs to hook up camera video signal with loop video outputs ( 16 or
8 channels depending on the model).
3.
VIDEO OUT,
: main monitor connectors, Composite Video Signal
(CVS) or S-Video
mode, it is possible to choose one out of many display modes.
4.
RS-485
:
RS-485 bus connector for remote control of speed dome cameras
or NV-KBD60 keyboard system . You can connect one of the devices in the
same time.
5.
SPOT 1
CVS
outputs for SPOT monitor, full screen display of any camera
or sequence of cameras
6.
ARI (Alarm Reset Input):
external signal applied to ARI and GND connectors is able to
cancel active relay outputs and the internal buzzer of the recorder. The
minimum voltage of the applied signal should be 0,3V and last about 0,5sec,
for deactivation
.
7.
socket to connect power cord 100 ~ 230 V AC, you need to make sure that
the plug is plugged in correctly and provides a stable and safe connection.
The power cord has a grounding PIN. If your power outlets does not have a
grounding PIN receptacle, do not modify the plug.
7
3
5
1
6 4
2
STARTI-G THE DEVICE
