V-DVR5108/DVD / V-DVR5116/DVD 1.0 version - User’s manual
All rights reserved © NOVUS Security Sp. z o.o.
56
RECORDER’S OPERATIO-
You can search video from the first to last recorded images, or you can set the start and stop times and
dates. For this last purpose serve the From and To options.
If the DVR’s time and date have been reset to a time that is earlier than some recorded video, it is
possible for the DVR to have more than one video stream in the same time range. Move to Select
a Segment, and select the video stream you want to search..
Highlight the box beside Check Time Overlap and press the
button. It toggles between On and Off.
You will only be able to turn the Check Time Overlap on or off if a user-defined date and time is set to
From and To. If the DVR’s date and time have been reset, it is possible for the DVR to have more than
one overlapping start and stop time NOTE: a lower number denotes later recording time.
Highlight the box beside Alarm-In . You can select the alarm inputs that you want to include in your
search.
Highlight the box beside Motion. You can select the cameras for which you want reports of motion
detection.
Highlight the box beside Video Loss. You can select the cameras for which you want any reports of
lost video.
Highlight the box beside Text-In. You can select the text-in devices for which you want report of text
input.
Highlight the box beside Record Channels. You can select the cameras that you want to search for any
reports of event recorded data.
You can also toggle On and Off self-diagnostic events as part of your search. The choices are:
•
Panic Record
•
Check recording
•
Check alarm in
•
Disk almost full
•
Disk bad
•
Disk temperature
•
Disk S.M.A.R.T
.
