V-DVR5108/DVD / V-DVR5116/DVD 1.0 version - User’s manual
All rights reserved © NOVUS Security Sp. z o.o.
45
RECORDER’S ME-U
Widok dla NV-DVR1600
P r es s button to display the menu screen. The menu on the setup screen has the following functions
•
Select — Activates highlighted blocks to detect motion.
•
Clear — Deactivates highlighted blocks so that they will not detect motion.
•
Reverse — Activates inactive highlighted blocks and deactivates active highlighted blocks.
•
Select All — Activates all blocks to detect motion.
•
Clear All — Deactivates all blocks so that they will not detect motion
•
Reverse All — Activates inactive blocks and deactivates active blocks.
•
OK — Accepts changes and closes Zone setup.
•
Cancel — Exits Zone setup with saving changes.
You can adjust the minimum number of detection blocks that must be activated to trigger a motion
alarm. Highlight a box under the
Min. Blocks
heading and adjust the number.
Turning Zone View On will allow you to observe how the DVR is reacting to motion.
Set Motion Ignoring Interval time to ignore single motion detection which has occured in this time .
At
Daytime setup
… you can set day time interval. Rest of the time is automaticly treated as nighttime.
Settings in the Actions tabs are identical with those in the Actions tab in the Alarm-in submenu.
3.5.3. Video loss
Highlight
Video Loss
in the Event menu and press button. The Video Loss setup screen appears.
At Obscuration bar you can define which degree of camera obscuration will be interpreted as video
loss. By moving the slider bar to the right increases the sensitivity and thus, camera obscuration is
interpreted as video loss.
Owing to his function, the DVR will react to video loss caused by covering the camera lens or blinding
it with a spray paint.
Settings in the
Actions
tabs are identical with those in the
Actions
tab in the
Alarm-in
submenu
