V-DVR5108/DVD / V-DVR5116/DVD 1.0 version - User’s manual
All rights reserved © NOVUS Security Sp. z o.o.
48
RECORDER’S OPERATIO-
Widok dla NV-DVR1600
4.
MULTIPLEXER’S OPERATIO-
4.1. Live monitoring
As soon as the DVR completes its initialization process, it will show live video on the attached monitor
and will play live audio through attached speakers. The default mode is to display all cameras at once
(16 or 8depending on the DVR model). Press one of camera buttons to display this camera in full
screen. Pressing
DISPLAY
button cycles DVR through the different display formats .
Press
SEQUENCE
button to star displaying cameras sequentially. Pressing this button in one of the
multi-view formats will cause the DVR to go through predefined screen layouts (Full Sequence) or
bottom right screen appears displaying live cameras sequentially (Cameo Sequence).
Press
Left
or
Right
arrow buttons to go to the previous or the next page.
If images from 4 cameras are displayed simultaneously on the monitor, press Left or the Right button to
change displayed cameras according to the following scheme
If all 4 cameras that should be shown on the screen at one time are disconnected, their signal is lost, or
they have been covered and user does not have rigths to watch their images, such screen will be
excluded from the sequence.
The choice between full-screen sequence or multiple-camera sequence is done in the menu of the DVR.
Press Freeze button to freeze the currently displayed image until the button is pressed again. When the
Freeze function is engaged, an icon appears in the lower left corner of the screen.
To display camera images in sequence on the spot monitor, you should press the SPOT button and then
select spot monitor number and sequence display function from the menu.
