Novell IFOLDER 3.7 - SECURITY ADMINISTRATION, Administration Manual

Page: 67 / 216

Installing and Configuring iFolder Services 67
no
vd
ocx
(e
n)
13
Ma
y 20
09
Novell iFolder
System
Configuration
Š
Name of iFolder Server: Specify a unique name to identify your iFolder
server. For example,
IF3EastS
Š
iFolder Public URL: Specify the public URL to reach the iFolder server.
Š
iFolder Private URL: Specify the private URL corresponding to the
iFolder server to allow communication between the servers within the
iFolder domain. The Private URL and the Public URL can be the same.
Š
Configure SSL for iFolder: There are three options to select from.
Š
SSL: Select SSL to enable a secure connection between the iFolder
server, iFolder Web Admin server, iFolder Web Access server, and
the iFolder clients. iFolder uses the HTTPS channel for
communication.
Š
Non SSL: Select Non SSL to enable unsecured communication
between the iFolder server, Web Admin server, Web Access server
and the clients. iFolder uses the HTTP channel for communication.
Š
Both: This option is selected by default. Selecting Both enables you
to select secure or non secure channel for communication between
the iFolder server, Web Admin server, Web Access server and the
clients. By default, these components use the HTTPS (secure)
communication channel. However, all components can also be
configured to use HTTP channel.
Š
iFolder Port to Listen On: Specify the port for the iFolder to Listen On.
Port 80 is the default
Š
Install into Existing iFolder Domain: If left unselected, this server
becomes the Master iFolder server. For slave server configuration, select
this option.
Š
Private URL Host or IP address of the Master Server: Specify the
private URL of the Master iFolder server that holds the master
iFolder data for synchronization to the current iFolder Server. For
example: https://127.0.0.1:443/simias10.
Novell iFolder
LDAP
Configuration
Š
IMPORTANT: iFolder Master server and slave servers must be in the
same eDirectory tree.
Directory Server Address: The IP address shown is the default LDAP
server for this service. If you do not want to use the default, select a
different LDAP server in the list. If you are installing into an existing tree,
ensure that the server you select has a master replica or read/write
replica of eDirectory. If you need to add another LDAP server to the list,
add it using the LDAP Configuration for Open Enterprise Services dialog.
IMPORTANT: If you are using a DSFW server, ensure that the iFolder
Admin user and iFolder Proxy user are already present. You must use
port 1389 for non-SSL communication and port 1636 for SSL
communication.
Install Settings Description