Novell IFOLDER 3.7 - SECURITY ADMINISTRATION, Administration Manual

Page: 56 / 216

56 OES 2 SP1: Novell iFolder 3.7 Administration Guide
no
vd
ocx
(e
n)
13
Ma
y 20
09
6.2.1 Configuring the iFolder Enterprise Server
After you install the iFolder enterprise server, you must configure the iFolder services, including the
LDAP, iFolder system, and iFolder administration settings.
1 If you plan to use an NSS volume as the System Store Path for the users’ iFolder data, use
iManager to create the NSS volume, then create a directory on the volume.
For information, see “
Managing NSS Volumes ” in the OES 2 SP1: NSS File System
Administration Guide .
2 Log in to the server as the root user, or open a terminal console, enter
su
, then enter the
root
password.
3
Start YaST, follow the YaST on-screen instruction to finish the installation. For more
information see
Step 1 on page 53 through Step 7 on page 55 in the section Section 6.1,
“Installing iFolder on an Existing OES 2 Linux SP1 Server,” on page 53 .
4
Select Use Following Configuration and click Novell iFolder to change the default
configuration settings for iFolder.
If you decide to use default settings, click Next to start Novell iFolder 3 configuration.
IMPORTANT: For security reasons, it is recommended that you always change the default
iFolder configuration settings.
5
Follow the Yast on-screen instructions to proceed through the Novell iFolder 3 configuration.
The following table summarizes the decisions you make.