Novell IFOLDER 3.7 - SECURITY ADMINISTRATION, Administration Manual

Page: 177 / 216

Clustering iFolder 3.7 Servers with Novell Cluster Services for Linux 177
no
vd
ocx
(e
n)
13
Ma
y 20
09
exit_on_error activate_evms_container $container_name $MOUNT_DEV $NCS_TIMEOUT
#mount the file system
exit_on_error mount_fs $MOUNT_DEV $MOUNT_POINT $MOUNT_FS
#add the IP address
exit_on_error add_secondary_ipaddress $RESOURCE_IP
#start iFolder
exit_on_error /etc/init.d/apache2 graceful
#return status
exit 0
##################################################
C.6.2 NSS File System
If your shared volume uses the NSS file system, use the following load script as a guide:
##### NSS File System Sample Load Script #########
#mount the file system
##MYPOOL is the name of your NSS pool
##MYVOL is the name of your NSS volume
nss /poolactivate=MYPOOL
exit_on_error nssmount -n MYVOL
#add the IP address
##xx.xx.xx.xx is your ’highly available’ IP address
exit_on_error add_secondary_ipaddress xx.xx.xx.xx
# start the service
exit_on_error /etc/init.d/apache2 graceful
#return status
exit 0
###################################################
C.7 Sample Unload Scripts for iFolder 3.7
Clusters
Š
Section C.7.1, “Linux POSIX File System,” on page 178
Š
Section C.7.2, “NSS File System,” on page 178
Š
Section C.7.3, “Troubleshooting,” on page 179