Novell IFOLDER 3.7 - SECURITY ADMINISTRATION, Administration Manual

Page: 64 / 216

64 OES 2 SP1: Novell iFolder 3.7 Administration Guide
no
vd
ocx
(e
n)
13
Ma
y 20
09
6
When the system prompts you to restart the Apache server, accept the option by clicking Yes ,
then restart the Apache server. This is necessary to use the new settings.
To manually restart the Apache Web server,
6a Open a terminal console, then log in as the
root
user.
6b Stop the Apache server by entering either of the following commands at the prompt:
/etc/init.d/apache2 stop
rcapache2 stop
6c Start Apache by entering either of the following commands at the prompt:
iFolder Web
Admin
Configuration
Š
An Apache alias that will point to the iFolder Web Admin
Application:
Specify the Apache alias to point to the iFolder Web Access
Application. This is a user-friendly pointer for the Apache service. For
example, /admin
Š
The host or IP address of the iFolder server that will be used by the
iFolder Web Admin application:
Specify the host or IP address of the
iFolder Enterprise Server to be used by the iFolder Web Access
application. This Web Access application performs all the user-specific
iFolder operations on the host that runs the iFolder Enterprise Server.
Š
Connect to iFolder server using SSL: This option is selected by default
to establish a secure connection between iFolder enterprise server and
the iFolder Web Admin application.
Š
iFolder server port to connect on: Specify the port for the iFolder
server to connect to the Web Admin application. Port 443 is the default.
Port 80 is the default value for non-SSL communication.
Š
Require a secure connection between the browser and the iFolder
Web Admin application:
Select the check box to establish a secure
connection between the Web browser and the iFolder Web Admin
application. This enables a secure SSL channel between the two.
Install Settings Description