Novell IFOLDER 3.7 - SECURITY ADMINISTRATION, Administration Manual

Page: 154 / 216

154 OES 2 SP1: Novell iFolder 3.7 Administration Guide
no
vd
ocx
(e
n)
13
Ma
y 20
09
4 Configure one or more of the following values, then click Save to apply the new settings:
Parameter Description
Disable
Synchronization Select this to disable the synchronization of data in the iFolder.
Deselect this to turn on synchronization, usually temporarily.
Default Value: Enabled, Yes
Disk Quota Select the Limit check box, then specify the maximum size (in MB) for the
selected iFolder.
If you enable a system-wide iFolder quota, a user’s account quota overrides it,
whether the user quota is lower or higher than the system quota.
Default Value: Disabled, 100MB
Used
(View only)
Reports how much space the iFolder data currently consumes.
Available
(View only)
Reports how much space is available on the server for the iFolder data.
Effective
(View only)
Reports effective space available on the server for the iFolder data.
File Size Limit: Specifies the maximum total file size (in MB) that an iFolder user is
allowed to use, across all iFolders the user owns for the selected user account.
Effective: Effective file size allocated for the user.
IMPORTANT: Users cannot successfully synchronize files of a size that would
cause a quota to be exceeded. If they try to do so, only part of the file is
synchronized, resulting in data corruption.
Excluded Files Specifies a list of file types to include or to exclude from synchronization for the
selected iFolder.
The file manager files called thumbs.db and .DS_Store are never
synchronized.
To add a file extension to an inclusion or exclusion filter, type the extension
(such as *.mpg), then click
Add to apply the filter.
To exclude a file type from the restricted file types, select the check box adjacent
to the file type, then click
Delete .
Default Value: Disabled, Allow all file types or the System-wide settings.