PRECESSION ELEPHANT 2 Scan Head 2
5.3 Safety precautions
•
Switch off the machine, where the scan head shall be incorporated, from mains,
in particular the laser, the scan head itself and eventually present translation
stages.
5.4 Installation
The following procedure describes the installation of a minimal system. A minimal
system consists of an ASC system controller, a laser, a scan head and the InScript
software. The installation of the scan head is embedded in this procedure.
Install a minimal system in the order as described in the procedure below.
Find further information regarding each step of the following procedure in the
corresponding manual in the respective chapter.
Tools
•
Hexagon socket screw key set
•
Torx key set
•
Cutter to cut the cooling water tubes and gas tubes in length
•
Tissues to wipe of small amounts of cooling water
Requirements
•
The ASC system controller is installed, as described in reference [
•
The laser is installed, as described in reference [
] and in the laser
documentation.
18
