Novanta Precession Elephant 2, User Manual

Page: 100 / 103

PRECESSION ELEPHANT 2 Scan Head 2 Instruction Manual 2021-09-22
Signal name
Al_Laser_Trig high level: 3.5 to 5 V
low level: 0 to 1.5 V
GND ground
Signal type
I Input
Internal circuit diagram excerpt
Not available
Installation examples
Not available
13.10.6 BEAM SWITCH
See also Figure 2 , no. ⑧ on page 20
Purpose
An optional external device can be connected here that can switch the beam path
between 2 scan heads.
Further reading
See section 13.10.2 on page 92
Implementation
Connector name: BEAM SWITCH
Connector type: female RJ45-connector
Maximum wire length: 25 m
Characteristics:
DATA O (output only)
Signal name
See section 13.10.2 on page 92
Signal type
See section 13.10.2 on page 92
100