MicroE Optira Installation Manual
Celera Motion
IM-1001 | REV181211
Page 35
©2018 Celera Motion
Reference Edges
Refer to the encoder interface drawing for tape scale reference edges.
Applicator Tool Mounting
The orientation of the Optira Applicator Tool corresponds to the Optira encoder as shown below.
The benching surfaces correspond to the A and B faces shown in the Optira interface drawing.
Typical Motion Axis
Recommended Customer Required Parts
The following parts or their equivalents are recommended to mount the Applicator Tool to the
motion axis.
Item
Mounting Scheme
Mounting Screws
M1.6 or 0-80 screws. Philips head screws are recommended
A
A
B
Base slide
Mounting Bracket
Holes for mounting screws
Benching pins
