ID50 Series Panel - Installation, Commissioning & Configuration Manual
Configuration
Mode
76
997-263, Issue 4
September 2002
5.10.2 Wipe Memory
CAUTION: USE THIS OPTION WITH CARE! ALL
CONFIGURATION PARAMETERS WILL BE DELETED!
To wipe the panels memory, from the System menu:
1
Using the numeric keypad, press the
2
button to
select the Wipe Memory option.
2
Press the
5
button to confirm the wipe memory
procedure. The LCD displays the following message.
When the configuration has been wiped the LCD re-
displays the System menu.
5.11 Normal
The Normal function returns the display to the Level 2
Configuration menu in a normal supervisory mode.
To return to the Level 2 Configuration menu and retain
Level 3 access (Engineer):
1
Press the
2
/
8
buttons to display additional
options (6 : System, 7 : Normal and
×
: More) from the
Commissioning menu.
2
Using the numeric keypad, press
7
. The panel will
reset and return to normal supervisory mode at the
User Menu.
When ALL configuration procedures have been
completed, remember to fit the Configuration Lock
jumper Link (J9).
[S1 COMM] 1 : Setup
2 : Circuit
3 : CBE Rules
4 : Zones 5 : Access
×
: More
[S1 COMM] 6 : System
7 : Normal
×
: More
[S1 SYSTEM] 1 : Crystal
2 : Wipe Memory
[S1] 1:Test
2:Disable/Enable
3:Clock
4:View Mode
5:Commission
Wipe ALL configuration memory
Press
3
to confirm
< : Cancel
Wiping configuration memory
Please wait . . .
5
2
or
8
2
7
